The embroidery hoop is one of the essential tools. When you are working with the best embroidery machine or hand embroidery hoop is needed at one point. The embroidery hoop keeps all fabrics taut for embroidery. It is to learn about how to use an embroidery hoop with convenience.
When you know the right way to use an embroidery hoop and set the fabric right that means you have made your embroidery stitching easier than before. It makes embroidery manageable and efficient. Once you put it ideally, nothing can stop you from getting the best results.
The secret of how to use an embroidery hoop ideally is adjusting it to the right amount of tension on the fabric. Sometimes your requirements will be modifying it tight, and sometimes a loose taut might work. Either way, once you set the pressure, it should remain the same when you finish your design.
One another thing to consider in all the process is to look out for distortion in your fabric. Sometimes a fabric is pulling on the bias that makes the fabric stretchy in the hoop. Once you take it out of the embroidery ring, the material will come back to normal, but the stitches will remain stretchy and do not look good. It is better to cater to the issue while you are starting your stitches and get flawless results.
Furthermore, there are different flavors of embroidery hopes available in the market. Wooden and plastic material is used in the manufacturing of hoops. Wooden hoop is popularly used in embroidery. In case your fabric is silky and keeps slipping from the round, you can add binding to one or both corners.
The binding will help to maintain the fabric tension and convenient stitches. Here in this article, you will get to know how to use an embroidery hoop and fit the fabric perfectly of your creations. Let’s get started:
Choose the embroidery hoop:
First of all, choose the embroidery hoop according to your needs and style requirement. Wooden embroidery hoops are commonly used; conversely, plastic rings are good; if you are looking forward to hanging your embroidery design plastic hoop will be a better choice.
Moreover, you can opt for round and oval-shaped hoops. Round embroidery hoops are convenient and readily available in the market. Afterward, choose the size – a round embroidery hoop is an open form three inches to twelve inches. We recommend a medium-size round wooden hoop for its overall positive features.
How to use an embroidery hoop?
It is time to place the fabric in your embroidery ring. Wash your hands before, so you might not leave chocolate or dirt stains on the material.
- Check the screw: First of all, check out the material of the screw. The outer ring has a metallic screw which you can tighten or loosen by turning the screw. Mostly the screw is metallic, but sometimes the material is plastic.
- Loose the screw: First of all, loosen up the screw and separate the inner (smaller) and outer (bigger) hoops. Keep the smaller one without the screw in your hand or flat in the workplace. Keep the other one aside; we will worry about it later. Afterward, drape your garment over the smaller ring with the right side up.
- Put the outer hoop: Now take the outer (bigger hoop) over the fabric and smaller ring. Now you need to loosen the screw so it can fit over properly. Do not think to put the inner hoop with the outer hoop as displacing it might cause inconvenience. Press down the bigger hoop with your hands on the inner ring and fabric.
- Tighten the screw: Tighten the screw enough so the fabric will not fall when you pick up the embroidery hoop.
- Check fabric taut: Now pull the edges of the garment for tightness and make sure it is firm enough.
- Tighten the screw: When you find that fabric is tight enough, tighten the screw-up. Bingo! You are ready to work.
Abstract
Learning how to use an embroidery hoop is not much difficult. A little attention will provide you perfectly perfect taut fabric for embroidery.